Konica Minolta bizhub PRO 1600P User Manual
Page 5
Safety Information
3
Disassemble and modification
WARNING
•
Do not attempt to remove the covers and panels which have been fixed to
the product. Some products internally have a high-voltage part or a laser
beam source inside that could cause an electric shock or blindness.
•
Do not configure this product yourself, otherwise a fire, electric shock, or
breakdown could result. If the product employs a laser, the laser beam
source could cause blindness.
Power cord
WARNING
•
Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull
on, or damage the power cord. Use of a damaged power cord (such as
having exposed core wire, broken wire, etc.) could result in a fire or
breakdown.
Should any of these conditions be found, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then call your
authorized service representative.