Setting up the printing system, Setting up the printing system 53 – Konica Minolta magicolor 2530DL User Manual
Page 61
Advertising
System Requirements for the Printer Driver
53
Setting Up the Printing System
"
This section describes the installation procedure under Red Hat Linux
8.0. This procedure is not required for installation under Red
Hat Linux 9.0.
1
From the Main Menu, click Extras, point to System Settings, and then
click Printer System Switcher.
"
If Red Hat Switch Printer is not installed on your computer, please
install it.
2
Select CUPS, and then click
OK.
3
Click OK.
4
From the Main Menu, select System Tools, then Terminal.
5
Enter the following command “/etc/init.d/cups restart”.
(It requires root privilege.)
Advertising