Konica Minolta magicolor 2530DL - Manual (Page 91)

Network Menu 83
Mac Address
HTTP
SNMP
Purpose Displays the Ethernet hardware address for this printer. It
cannot be changed.
Options None
Default Printer dependent
Purpose Enables or disables the printer’s internal web page (see
chapter 5, “Using PageScope Web Connection.” )
When HTTP is set to “OFF”, IP printing is not possible.
Options HTTP SET: OFF, HTTP SET: ON
Default HTTP SET: ON
Notes In order for these settings to be applied, the printer must be
turned off, then on again after the setting is specified.
Purpose Enables or disables SNMP (Simple Network Management
Protocol), a scalable, distributed management suite for
managing small to large size networks.
Options SNMP SET: OFF, SNMP SET: ON
Default SNMP SET: ON
Notes In order for these settings to be applied, the printer must be
turned off, then on again after the setting is specified.