Setting the address manually, Setting the address manually 88, Caution – Konica Minolta magicolor 2530DL User Manual
Page 96
Network Connection
88
Setting the Address Manually
You may also manually change the printer’s IP address, subnet mask, and
gateway by using the following instructions. (See chapter 3, “Understanding
the Network Configuration Menus,” for more information.)
"
When manually setting the IP address, turn off DHCP and BOOTP
first. In addition, when the IP address is changed, add a new port or
reinstall the printer driver.
CAUTION
You should always notify your network’s administrator before changing
the printer’s IP address.
1
Turn on your PC and printer.
2
When the printer’s message window displays
READY
, set the IP address.
Press this
key . . .
(until) the message window displays . . .
READY
MENU
SPECIAL PAGES
MENU
NETWORK
DHCP:OFF
BOOTP:OFF
IP ADDRESS
192.168.1.2
IP ADDRESS
192.168.1.2
Use the
and
keys to move to each of the four number triplets.
(Leading zeros of each triplet are automatically suppressed; for example,
“.001.” displays as “.1.”)
Use the
and
keys to increase or decrease each number.
IP ADDRESS
xxx.xxx.xxx.xxx