Konica Minolta PagePro 1350EN - Manual (Page 93)

Configuring the Printer 86
IP Address* Sets the printer’s IP address.
Range: 0–255 for each xxx triplet
Default: 192.168.1.2
"
If the specified IP address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Subnet Mask* Sets the printer’s subnet mask address.
Range: 0–255 for each xxx triplet
Default: 255.255.255.0
"
If the specified subnet mask address is outside of
the allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Default Router* If a router is used on the network, sets the router’s
address.
Range: 0–255 for each xxx triplet
Default: 192.168.1.2
"
If the specified router address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
RAW Port
Number Identifies the number of the printer’s RAW port.
Choices: 1 - 65535
Default: 9100
Host Name Specifies the host name.
Range: Up to 31 characters
Default: PagePro 1350EN
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Log out button Logs out of Administrator Mode and returns to User
Mode.
* Always enter these addresses without leading zeros. For example,
131.011.010.001 should be entered as 131.11.10.1.
Item Description