Konica Minolta PagePro 1350EN - Manual (Page 23)

Installing the PCL6 Driver for a network printer 16
Installing the PCL6 Driver for a network
printer
To install the PCL6 driver for your network printer, please follow these steps:
1
Connect your printer to the network.
When using an Ethernet cable, plug the RJ45 connector into the Ethernet
interface port of the printer.
2
Turn on your PC and printer.
Wait until the green “Ready” indicator is on.
3
Insert the CD-ROM that shipped with your printer and from the CD-ROM
menus, select Printer Setup then PCL6 Driver.