Konica Minolta BIZHUB C30P - Manual (Page 33)

5 Option Setup
28
To assign a particular hardware address to an IP address in the
Client List box:
1.
From the Client List box, select the IP address that will be
assigned the hardware address.
2. Click the Configure button.
A dialog box for setting the hardware address appears.
3. Enter the hardware address into the Hardware Address box.
4. Click the OK button.
The setting appears in the Client List box.
To remove the setting for the IP address with a hardware address
assigned, delete any values entered into the
Hardware Address
box, and then click the OK button.
After specifying the BOOTP settings, click the OK button.
Note
• After sending the IP addresses to a device, the icon is displayed in
the Client List box. This mark means that the address was assigned
while the PageScope Network Setup is working.