Konica Minolta magicolor 3730DN - Manual (Page 181)

Configuring the Printer 5-44
SNMP
The Network - SNMP window allows you to configure the following items:
Item Description
SNMP SNMP v1/
v2c(IP) If Enable is selected, SNMP v1/v2c(IP) is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
NETWORK - SNMP - SNMP SET
UDP Port Specifies the UDP port number.
Range: 1 - 65535
Default: 161
SNMP v1/
v2c Read
Commu-
nity Name Specifies the community name to be used for scan-
ning.
Range: 1 to 15 characters
Default: public
Write If Enable is selected, Write is enabled.
Choices: Enable, Disable
Default: Enable
Write
Commu-
nity Name Specifies the community name to be used for read-
ing and writing.
Range: 1 to 15 characters
Default: private