Konica Minolta magicolor 7450II - Manual (Page 254)

Viewing Printer Status 234
Tray2 Paper Size Indicates the setting for the size of paper
loaded into Tray 2.
Width Indicates the paper width when Paper
Size is set to Custom Size.
Length Indicates the paper width when Paper
Size is set to Custom Size.
Paper Type Indicates the setting for the type of paper
loaded into Tray 2.
Size Settings Indicates whether the paper size for Tray
2 is automatically detected or manually
set.
Tray3/4/5
This item
appears only if
the optional
lower feeder unit
is installed.
Paper Size Indicates the setting for the size of paper
loaded into the tray.
Paper Type Indicates the setting for the type of paper
loaded into the tray.
Tray Chaining If Enable is indicated and the specified
paper tray runs out of paper during print-
ing, a paper tray loaded with paper of the
same size is automatically selected so
printing can continue.
If Disable is indicated and the specified
paper tray runs out of paper, printing
stops.
Tray Mapping Tray Mapping
Mode If On is indicated, Tray Mapping Mode is
enabled. Paper is fed from the physical
tray assigned to each logical tray.
If Off is indicated, Tray Mapping Mode is
disabled.
Logical Tray
0–9 Indicates which physical tray is assigned
to each logical tray.
Item Description