Acer AR380 F1 - Manual (Page 6)

6
Acer AR380 F1 specifications
Technical specifications
PCIe
®
specifications
The primary I/O bus for the main board is PCIe Gen2. The following table lists the characteristics of the
PCI-E bus segments. Details about each bus segment follow the table.
NOTE: The signaling bit rate of PCI Express is 2.5Gbit/s one direction per lane for Gen 1 and 5.0Gbit/s one
direction per lane for Gen 2.
Expansion
slot Number Type Bus
width
1
Voltage Connector Location Length
PCIe x16 1 PCIe
Gen2 x8 3.3V x16 Riser, left Full height
PCIe x8 2 PCIe
Gen2 x4 3.3V x8 Riser, left Full height
PCIe x8 3 PCIe
Gen2 x4 3.3V x8 Riser,
right low-profile
Flex I/O 1 PCIe
Gen2 x8 3.3V x8 Riser, left Full height
NOTE:
1. Indicates the number of physical electrical lanes running to a PCIe ® connector.
2. Default bus assignment (in decimal). Inserting cards with PCI™ bridges may alter the actual bus
assignment number.
3. Slots are enumerated differently based on the operating system. Microsoft® operating systems
enumerate Device ID by bus starting from the lowest bus to the highest.
Onboard storage specifications
Item Description
Controller Intel ® 82801JR (ICH10R) I/O Controller Hub
Simultaneous drive transfer channels 6 onboard SATA ports
Max throughput per channel 3 Gb/s
Data transfer method
•
Non-RAID mode
•
RAID mode
Drive type supported Serial ATA
RAID levels support
•
RAID 0, 1, 10, 5 (Intel software RAID)
•
RAID 0, 1, 10 (Adaptec software RAID)
NOTE: Intel software RAID only supports Windows OS
RAID function support
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility
Installation scripting support
NOTE: This controller does not support LED functions
RAID OS support
• Windows Server 2008