Algolith HD to SD Downconverter XVC-1001-DC - Manual (Page 7)

XVC-1001-DC Guide to installation and operation
7
Installation and setup
The XVC-1001-DC card is installed in the openGear frame.
openGear frame
The XVC-1001-DC card requires a BNC rear output module. Depending on the
frame model you have purchased, your frame may be equipped with a fixed
100 BNC rear panel.
openGear frame with a fixed 100 BNC rear panel
Your frame model may have a modular rear panel, to accommodate different
types of cards. You will then need to purchase and install a 10 BNC single rear
module for each XVC-1001-DC card in your openGear frame.
openGear frame with a modular rear panel
For information on the openGear frame and how to install your XVC-1001-
DC card and your rear modules, see the DFR-8310-C Multi Definition Digital
Products Frame and Power Supply (PS-8300) User Manual, provided with your
Algogear Installation CD.