Starting the agent on linux, Starting the agent on netware, R linux, see – Adaptec Storage Manager User Manual
Page 35
Step 2: Starting Adaptec Storage Manager
●
34
Starting the Agent on Linux
On systems running Linux, the Adaptec Storage Manager agent starts
automatically when the system is powered on.
To verify that the agent is running:
1
Open a shell window.
2
Enter this command:
ps -ef | grep StorAgnt.sh
3
If the agent is running, it’s listed as
sh StorAgnt.sh
.
4
Manage and monitor the system by logging into it as a remote
system (see
page 61
).
The Adaptec Storage Manager agent’s default settings are suitable for
most storage spaces. To customize the settings for your specific
requirements, see
.
Starting the Agent on NetWare
To start the agent:
1
From the NetWare console, type:
LOAD RaidAgnt
2
Press Enter.
3
Manage and monitor the system by logging into it as a remote
system (see
page 61
).
The Adaptec Storage Manager agent’s default settings are suitable for
most storage spaces. To customize the settings for your specific
requirements, see
.