Moving and repacking the system – Xerox WorkCentre C2424-5986 User Manual
Page 51
Moving and Repacking the System
WorkCentre® C2424 Copier-Printer
7-51
Moving and Repacking the System
This section includes:
■
"Running the WorkCentre C2424 Copier-Printer Shut-Down Procedure" on page 7-51
■
"Moving the System Within the Office" on page 7-52
■
"Repacking the System for Shipment" on page 7-53
For safety information, see
Appendix A
of this guide or go to
Getting Started/User Safety
on
the User Documentation CD-ROM.
Follow these guidelines to move the system within the office or to prepare it for shipment.
Caution
Parts of the system are hot. To avoid personal injury or damage to the system, allow the
ink to solidify. Run the shut-down procedure to cool the system quickly.
Running the WorkCentre C2424 Copier-Printer Shut-Down
Procedure
Run the shut-down procedure before moving or shipping the system.
1.
Turn off the system using the power switch located under the interface cover on the right
side of the system.
2.
Within 10 seconds, select
Shutdown for Moving System
at the control panel, then
press the Enter button.
Videos are available with instructions for repacking the scanner unit and for
repacking the document feeder. Videos are located on the User Documentation
CD-ROM and at
2424-031