Xerox WorkCentre M118i-4251 - Manual (Page 76)

Supported Paper Sizes and Types
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide 75
Supported Paper Types
The following table lists the paper types supported for each paper tray and duplex kit.
O : Available
X : Not available
• When using Arjo Wiggins Conqueror High Speed Laser Laid CON90F (64010283),
the paper type is set to Heavyweight 1.
• If you select [Lightweight], the machine lowers the temperature of the fuser unit
when printing. Select this option when paper curls or other printing problems occur
due to high temperature in the fuser unit when it sets toner on the paper.
• If you select [Label], [Heavyweight 1] or [Heavyweight 2], load the paper LEF. If
loading the paper SEF, the paper may not feed correctly, and print quality may be
affected.
• Depending on the operating environment, certain types of Heavyweight 2 paper may
not feed into the machine properly or print quality may be negatively affected.
Paper Type Tray 1 Tray 2, 3, 4
Tray 5
(Bypass Tray)
Duplex Kit
Plain O O O O
Transparency X O O X
Label X O O X
Lightweight X O O X
Heavyweight 1
(90–169 g/m
2 )
X O O X
Heavyweight 2
(170–216 g/m
2 )
X O O X