Xerox 5230 - Manual

WorkCentre
®
5225 / 5230
WorkCentre ® 5225 / WorkCentre ® 5225A WorkCentre ® 5230 / WorkCentre ® 5230A
Output Speed
– Printing and copying
Black and White
Up to 25 ppm (pages per minute)
8.5 x 11 in. (A4/210 x 297 mm) LEF
Up to 30 ppm
8.5 x 11 in. (A4/210 x 297 mm) LEF
Up to 16 ppm
8.5 x 14 in. (216 x 356 mm)
Up to 19 ppm
8.5 x 14 in. (216 x 356 mm)
Up to 14 ppm
11 x 17 in. (A3/297 x 420 mm
Up to 16 ppm
11 x 17 in. (A3/297 x 420 mm)
First-Image-Out
Time (FcOT)
– Letter-size, from Platen
to Offset Catch Tray
As fast as 4.3 seconds
Print Specifications
System
Memory 256 MB
System Disk 40 GB
Network Printing
– Network Controller
Processor 333 MHz
Printer Languages
(auto sensing/switching) PCL ® 5e
PCL ® 6
HP-GL2
Adobe
® Postscript ® 3™ (optional)
Network Printing
– Resolution 600 x 600 dpi, 1200 x 1200 dpi
Network Printing
– Printing Features
Features
Secure print
Delay print (specific time)
Sample set
Booklet creation
Cover selection
Paper selection by attribute
N-up
Watermark
Fit to new paper size
Transparency separators
Banner sheet enable/disable
Output tray selection
Image quality (High Speed, High Resolution)
Draft mode
Store and recall driver settings
Reduce/enlarge
Mirror image
Save to Mailbox
Finishing options
Bi-Directional
WorkCentre 5225 shown with High-Capacity
Tandem Tray and Integrated Office Finisher WorkCentre 5230 shown with High-Capacity
Tandem Tray and Office Finisher LX with Booklet Maker
Detailed Specifications 1