The control panel and screen, The document feeder and output trays, Replacing the drum cartridge – Xerox WorkCentre M118i-4251 User Manual
Page 79: Removing the old drum cartridge

8 Maintenance
78
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide
The Control Panel and Screen
Regular cleaning keeps the control panel and screen free from dust and dirt. To remove
finger prints and smudges, clean the control panel and screen with a soft, lint-free cloth,
slightly moistened with water.
NOTE: The machine should be powered off before cleaning the control panel to
prevent unintended operation.
The Document Feeder and Output Trays
Use a cloth moistened with water to clean the document feeder, output trays, paper
trays and the outside areas of the machine.
Replacing the Drum Cartridge
The drum cartridge is a customer replaceable unit. After approximately 55,000 copies/
prints, the machine will display a warning message before the drum reaches the end of
life. Order a replacement cartridge now to insure continuous operation.
Removing the Old Drum Cartridge
1.
Pull the front cover towards you to open
it.
2.
Open Tray 5 (bypass tray) if necessary,
and then open Cover A while lifting up
the release lever.
Country
Part Number
All countries
13R589
A
D
- WorkCentre M118i-6285 WorkCentre M118-6145 WorkCentre M118i-2982 WorkCentre M118-M118i-4179 WorkCentre M118-4111 WorkCentre M118-M118i-2910 WorkCentre M118-2842 WorkCentre M118-M118i-6213 WorkCentre M118-4131 WorkCentre M118-2862 WorkCentre M118i-3002 WorkCentre M118-M118i-4206 WorkCentre M118-M118i-2937 WorkCentre M118i-4271 WorkCentre M118-6165 WorkCentre M118i-6305 WorkCentre M118-M118i-6240