Xerox DocuColor 2240-1537 - Manual (Page 72)

2–66
U S E R G U I D E (P R I N T )
Setting the Print Driver Properties on Macintosh
This section describes printer specific settings included in the print
driver properties.
NOTE: Typically, Installable Options is automatically set according
to the 1-directional communications with the printer. It is not
necessary to change the setting.
• Installable Options on the Option menu
• Printer Specific Options
Configure Settings
This describes Installable Options.
NOTE: In order to print correctly, it is necessary to make
appropriate settings in this tab.
1
Select the printer using the Chooser and select Setup. The
Current Printer Description File (PPD) Selected screen is
displayed.
2
Select Configure on the Current Printer File (PPD) Selected
screen. The Installable Options list is displayed.
3
Set the option menu items in Installable Options. Select OK.
Settings
Memory Specify the amount of printer memory.
• The default setting is Standard 512MB
Output Tray Set the destination for the output.
• The items that can be selected vary according to whether
Finisher has been installed.
Paper Detect by Tray Specify either Statement Paper Detection, or A5 Paper Detection.