Aussie VANTAGE 6804 - Manual (Page 14)

14
Step 15
Side Burner Igniter Wire Connection
The Side Burner Igniter Wire is pre-installed and connected to the Ignition Box. Attach the wire to the Side Burner elec-
trode by sliding the wire connector onto the electrode terminal.
Step 16
A. Side Burner Control Knob Assembly
Align the flat keyed hole in the Control Knob with the keyed stem of the Side Burner Valve. Push the Control Knob onto
the Side Burner Valve stem.
B. Side Burner Grid Assembly
Place the Side Burner Grid onto Side Burner Table, allowing the three protruded ends to fall into the three holes around
the Side Burner.
Underside view of
Side Table/Side Burner
B
A
Note:
Shown without Regulator
Hose for clarity.
To avoid possible damage to grill, DO NOT ATTEMPT TO LIFT GRILL BY THE SIDE TABLES
CAUTION
!