Options, 1 temp, 2 centrif – AEG L62270FL User Manual

Page 9: 3 extra aclarado/enxag, 4 extra rapido, 5 inicio diferido, Settings, 1 acoustic signals, Options 7. settings

Advertising
background image

Programme

Centrif.

Extra

Aclara-

do/

En-

xag.

1)

Extra

Rapido

2)

Inicio Di-

ferido

Algod. Eco

3)

1) If you set Extra Rinse option, the appliance adds some additional rinses. In the Rinse programme, if
you set a low spin speed the appliance performs delicate rinses and a short spin.
2) If you set a shorter duration, we recommend that you decrease the quantity of the load. It is possible
to load fully the appliance, however the washing results are reduced.
3) For this programme you can set only the Extra Quick duration.

6. OPTIONS

6.1 Temp.

Set this option to change the default

temperature.

Indicator

= cold water.

The indicator of the set temperature

comes on.

6.2 Centrif.

With this option you can decrease the

default spin speed.
The indicator of the set speed comes on.
Additional spin options:
Rinse Hold
• Set this option to prevent the laundry

creases.

• The relevant indicator comes on.

• The washing programme stops with

the water in the drum. The drum turns

regularly to prevent the laundry

creases.

• The door stays locked. You must drain

the water to unlock the door.

To drain the water refer to

‘At the end of the

programme’.

6.3 Extra Aclarado/Enxag.

With this option you can add some rinses

to a washing programme.
Use this option for persons allergic to

detergents and in areas where the water

is soft.
The related indicator comes on.

6.4 Extra Rapido

With this option you can decrease the

programme duration.
• Press this button one time to set

'Shortened duration' for items with

daily soil.

• Press this button two times to set

'Extra Quick' for items with almost no

soil.

Some programmes accept

only one of the two options.

6.5 Inicio Diferido

With this option you can delay the start

of a programme from 30 minutes to 20

hours.
The display shows the related indicator.

7. SETTINGS

7.1 Acoustic signals

The acoustic signals operate when:
• You activate the appliance.

• You deactivate the appliance.

• You press the buttons.

• The programme is completed.

• The appliance has a malfunction.

ENGLISH

9

Advertising