Agilent Technologies 6631B - Manual (Page 53)

Language Dictionary - 4
53
SENSe:FUNCtion
Agilent 66312A, 66332A Only
This command configures the measurement sensor to measure either voltage or current when an acquire
trigger is used. The query returns the function setting, either VOLT or CURR.
Command Syntax SENSe:FUNCtion <function
Parameters "VOLTage" | "CURRent"
Examples SENS:FUNC "VOLT"
Query Syntax SENSe:FUNCtion?
Returned Parameters <SRD>
SENSe:SWEep:OFFSet:POINts
Agilent 66312A, 66332A Only
This command defines the offset in a data sweep when an acquire trigger is used. Negative values
represent data samples taken prior to the trigger.
Command Syntax SENSe:SWEep:OFFSet:POINts <NRf+>
Parameters -4095 through 2,000,000,000
*RST Value 0
Examples SENS:SWE:OFFS:POIN -2047
Query Syntax SENSe:SWEep:OFFSet:POINts?
Returned Parameters <NR3>
Related Commands SENS:SWE:TINT SENS:SWE:POIN MEAS:ARR
SENSe:SWEep:POINts
This command defines the number of points in a data sweep.
Command Syntax SENSe:SWEep:POINts<NRf+>
Parameters 0 through 4096
*RST Value 2048
Examples SENS:SWE:POIN 1024
Query Syntax SENSe:SWEep:POINts?
Returned Parameters <NR3>
Related Commands SENS:SWE:TINT SENS:SWE:OFFS MEAS:ARR
SENSe:SWEep:TINTerval
This command defines the time period between samples
Command Syntax SENSe:SWEep:TINTerval<NRf+>
Parameters 15.6 microseconds through 31200 seconds
*RST Value 15.6 microseconds
Examples SENS:SWE:TINT 31.2E-6
Query Syntax SENSe:SWEep:TINTerval?
Returned Parameters <NR3>
Related Commands SENS:SWE:POIN SENS:SWE:OFFS MEAS:ARR