Agilent Technologies E3632A - Manual (Page 62)

Chapter 3 Front-Panel Operation
Remote Interface Configuration
60
5
Save the change and turn off the I/O configuration mode.
The RS-232 baud rate and parity selections are stored in non-volatile memory,
and does not change when power has been off or after a remote interface reset.
The power supply displays a message to show that the change is now in effect.
If the baud rate and the parity are not changed, “NO CHANGE” will be displayed
for one second.
N o t e
To exit the I/O configuration mode without any further changes, press the
“I/O Config” key until the “NO CHANGE” message is displayed.
CHANGE SAVED
I/O Config