AEG Voxtel R110 - Manual (Page 5)

5
UK
3 INSTALLATION
3.1 Removing the belt clip
t
Pull the belt clip latch away from
the PMR.
t
While pulling the belt clip latch,
push up the belt clip.
3.2 Installing the belt clip
t
Slide the belt clip into the slot.
>A “click” indicates the belt clip
is locked into its position.
3.3 Installing the batteries
(see P3)
t
Slide down the battery compartment cover.
t
Insert 3 x AAA rechargable batteries. Position the batteries according
to the polarity marking on the battery compartment.
t
Replace the battery cover.
Notes:
t
The PMR units have a built-in power saver (PS) for maximum battery
life, but when not in use, turn the units off to save battery power.
t
Remove the batteries if the units will not be used for a long period
of time.
t
Only use rechargable batteries when using the charging function
Fig. 1 Fig. 2
Belt clip latch