AEG Voxtel smart3 - Manual (Page 27)

Set up your Voxtel Smart 3 with Welcome Wizard
11
6 Set up your Voxtel Smart 3 with
Welcome Wizard
When you first power up the phone or after doing a factory data reset, the Welcome
Wizard will help you set up and personalise your phone, such as language, date, time, Wi-
Fi setting, etc.
To start, tap Language, and then select your preferred language and then tap Next to
begin phone setup.
Note
If the Welcome Wizard did not appear when you power up the phone, press
H
and tap
Settings > Privacy > Factory data reset to reset the phone.
6.1 Wi-Fi settings
1 Tap Wi-Fi settings.
2 Tap Turn on Wi-Fi.
3 Under Network notification, tap to enable Notify me when an open network is
available.
- If enabled,
✓
appears next to the option.
- The screen displays a list of available Wi-Fi networks.
4 Tap to select the network you want to connect.
- If the network is secured, you will be prompted to enter the password.
- If you cannot find your favourite Wi-Fi network name, press
H
and then tap Scan.
5 Tap on the Password edit box to launch the onscreen keyboard.
6 Enter password and tap Done.
7 Tap Connect.
- The phone will start to obtain the IP address of the network you have selected.
- This may take a few minutes.
- When connected, appears on the status bar of the handset.
8 Tap Next to proceed with date & time settings.