AEG FAVORIT 99015 VI - Manual (Page 22)

Problem Possible cause Possible solution
The cap of the salt contain-
er is loose. Tighten the cap.
Whitish streaks and
stains or bluish lay-
ers on glasses and
dishes. The released quantity of
rinse aid is too much. Decrease the released quan-
tity of rinse aid
.
The quantity of detergent
was too much. Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
Dry water drop
stains on glasses
and dishes. The released quantity of
rinse aid was not sufficient . Increase the released quanti-
ty of rinse aid.
The quality of the detergent
can be the cause. Try a different brand of de-
tergent.
The dishes are wet. • The programme had no
drying phase.
• The programme had a
low temperature drying
phase.
For better drying results,
keep the door ajar for some
minutes.
The dishes are wet
and matt. The rinse aid dispenser is
empty. Make sure that there is rinse
aid in the rinse aid dispenser.
The quality of the rinse aid
can be the cause. Try a different brand of rinse
aid.
The quality of the combi
detergent tablets can be
the cause. • Try a different brand of
combi detergent tablets.
• Activate the rinse aid dis-
penser and use the rinse
aid together with the com-
bi detergent tablets.
Activating the rinse aid
dispenser with the multitab
function activated
1. Press the on/off button to activate
the appliance.
2. Press OPTION to open the menu
option.
3. Press one of the menu buttons and
go to SETTINGS .
4. Press OK START to open the sub-
menu.
5. Press one of the menu buttons and
go to RINSE AID .
6. Press OK START .
7. Press one of the menu buttons to
activate the rinse aid dispenser
( ON ).
8. Press OK START to confirm.
9. Press OPTION to close the menu
option.
TECHNICAL INFORMATION
Dimensions Width / Height / Depth (mm) 596 / 818 - 898 / 550
22