AEG BE2003021M - Manual (Page 9)

6. CLOCK FUNCTIONS
Clock function Application
Time of day To show, set, or change the time.
Minute minder To set a countdown time. This function has no effect
on the operation of the oven.
Duration To set the length of an oven operation.
End To set the switch-off time for an oven function.
You can use Duration and
End at the same time if you
want the appliance to activate
and deactivate automatically:
first set the Duration
and then
the End .
6.1 Setting the clock functions
hr min hr min
1. For Duration and End, set an oven
function and temperature. This is not
necessary for the Minute Minder.
2. Press the Selection button again and
again until the indicator for the nec-
essary clock function flashes.
3. Press + or - to set the necessary
clock function.
The display shows the indicator for
the clock function you set. When the
set time ends, the indicator flashes
and an acoustic signal sounds for
two minutes.
With the Duration and End func-
tions, the appliance deactivates
automatically.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
6.2 Cancelling the clock
functions
1. Push the Selection button again and
again until the necessary function in-
dicator flashes.
2. Push and hold the button -.
After some seconds the clock func-
tion goes out.
7. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
ENGLISH
9