AEG HG956440SM - Manual (Page 17)

• The pan supports are not dishwasher proof; they must be washed by hand.
• When you wash the pan supports by hand, take care when you dry them as the enamel-
ling process occasionally leaves rough edges. If necessary, remove stubborn stains using a
paste cleaner.
• Make sure you position the pan supports correctly after cleaning.
• To make burners work correctly, make sure that the arms of the pan supports are in the
centre of the burner.
• Be very careful when you replace the pan supports to prevent the hob top from
damage.
After cleaning, dry the appliance with a soft cloth.
Removing the dirt:
1.
– Remove immediately: melting plastic, plastic foil, and food containing sugar.
– Stop the appliance and let it cool down before you clean: limescale rings, water
rings, fat stains, shiny metallic discolorations. Use a special cleaner for glass or
stainless steel.
2. Clean the appliance with a damp cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
To make burners work properly, make sure that pan supports are placed in the way that the
arms are centred upon the burner.
In order to avoid damaging the hob top pay attention when replacing the pan support.
WARNING!
Do not use knives, scrapers or similar instruments to clean the surface of the glass or be-
tween the rims of the burners and the frame (if applicable).
WARNING!
Do not slide cookware over the glass because it could scratch the surface. Also, do not let
hard or sharp objects fall onto the glass or hit the edge of the hob.
Cleaning of the spark plug
This feature is obtained through a ceramic ignition candle with a metal electrode. Keep
these components well clean to prevent difficult lighting and check that the burner crown
holes are not obstructed.
Periodic maintenance
Periodically speak your local Service Force Centre to check the conditions of the gas supply
pipe and the pressure adjuster, if fitted.
Care and cleaning 17