Replacing the lamp, Closing the door – AEG SKS58800S2 User Manual

Page 18

Advertising
background image

Problem

Possible cause

Solution

Water flows into the re-

frigerator.

The water outlet is clogged.

Clean the water outlet.

Products prevent that water

flows into the water collector.

Make sure that products do not

touch the rear plate.

Temperature cannot be

set .

FROSTMATIC or COOLMATIC

functions switched on.

Switch off FROSTMATIC or COOL-

MATIC manually, or wait to set

the temperature until the func-

tion has reset automatically. Re-

fer to "FROSTMATIC or COOLMAT-

IC function"..

The temperature in the

appliance is too low/high.

The temperature regulator is not

set correctly.

Set a higher/lower temperature.

The door is not closed correctly.

Refer to "Closing the door".

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

Many products are stored at the

same time.

Store less products at the same

time.

The temperature in the re-

frigerator is too high.

There is no cold air circulation in

the appliance.

Make sure that there is cold air

circulation in the appliance.

The temperature in the

freezer is too high.

Products are too near to each

other.

Store products so that there is

cold air circulation.

There is too much frost.

Food is not wrapped correctly.

Wrap the food correctly.

The door is not closed correctly.

Refer to "Closing the door".

The temperature regulator is not

set correctly.

Set a higher temperature.

Replacing the lamp

The appliance is equipped with a longlife LED interior light.

Only service is allowed to replace the lighting device. Contact your Service Center

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.

18

What to do if…

Advertising