Operation, Ignition of the burner – AEG HG654320UM User Manual
Page 13
Symbol
Description
ignition position / maximum gas supply
minimum gas supply
OPERATION
Ignition of the burner
WARNING!
Be very careful when you use open fire in kitchen environment. Manufacturer decline any
responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
1.
Turn the control knob counterclockwise to the maximum position ( ) and push it
down.
2.
Keep the control knob pushed for approximately 5 seconds; this will let thermocouple
to warm up. If not, the gas supply will be interrupted.
3.
Adjust the flame after it is regular.
If after some tries the burner does not light, check if the crown and its cap are in correct
positions.
Each control knob has a pilot light. It lights up when you turn the control knob.
3
4
2
1
Operation
13