Safety instructions, 1 installation, 2 electrical connection – AEG BE5304001M User Manual

Page 4: Do not use a steam cleaner to clean the appliance

Advertising
background image

Ensure that the appliance is switched off before

replacing the lamp to avoid the possibility of electric

shock.

Do not use a steam cleaner to clean the appliance.

Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can scratch

the surface, which may result in shattering of the glass.

If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

Excess spillage must be removed before the pyrolytic

cleaning. Remove all parts from the oven.

To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the

side walls. Install the shelf supports in the opposite

sequence.

The means for disconnection must be incorporated in

the fixed wiring in accordance with the wiring rules.

Only use the core temperature sensor recommended

for this appliance.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction

supplied with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not pull the appliance by the

handle.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is

installed below and adjacent safe

structures.

• The sides of the appliance must stay

adjacent to appliances or to units with

the same height.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not contact

an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

www.aeg.com

4

Advertising
This manual is related to the following products: