AEG BP5304001B - Manual (Page 10)

6. CLOCK FUNCTIONS
SYM-
BOL
FUNCTION DESCRIPTION
MINUTE MIND-
ER
To set a countdown time. This function has no ef-
fect on the operation of the oven. You can set the
MINUTE MINDER at any time, also when the ap-
pliance is off.
TIME OF DAY To set, change or check the time of day. Refer to
“Setting the time”.
DURATION To set how long the appliance must operate. First
set an oven function before you set this function.
END To set when the appliance must be deactivated.
First set an oven function before you set this func-
tion. You can use Duration and End at the same
time (Time Delay) to set the time when the appli-
ance must be activated and then deactivated.
Press again and again to
change the clock function.
Press to confirm the settings
of the clock functions, or wait 5
seconds for the setting to be
confirmed automatically.
6.1 Setting the DURATION or
END
1.
Press again and again until the
display shows or .
or flashes in the display.
2. Press or to the set minutes.
3. Press to confirm.
4.
Press or to set the hour.
5. Press to confirm. An acoustic sig-
nal sounds for 2 minutes after the
time ends.
or symbol and
time setting flash in the display. The
oven stops.
6. Press any button or open the oven
door to stop the acoustic signal.
If you press when you set the
hours for DURATION , the
appliance goes to setting of the
END
function.
6.2 Setting the MINUTE
MINDER
Use this to set a countdown (maximum 2
h 30 min). This function has no effect on
the operation of the oven. You can set
the MINUTE MINDER at any time, also if
the appliance is off.
1. Press again and again until
and "00" flash in the display.
2. Press or to set the MINUTE
MINDER. At first the time is calcula-
ted in minutes and seconds. When
the time you set is longer than 60
minutes, the symbol
comes on
the display. The appliance now cal-
culates the time in hours and mi-
nutes.
3. The MINUTE MINDER starts auto-
matically after five seconds.
After 90% of the set time, an
acoustic signal sounds.
Press a button to stop the signal.
4. When the set time ends, an acoustic
signal sounds for two minutes.
"00:00" and
flash in the display.
Press a button to stop the signal.
If you set the MINUTE MINDER
when the DURATION or END
function operates, the symbol
comes on the display.
10 www.aeg.com