Axis Communications 5600 - Manual (Page 107)

Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
Section 9: Management & Configuration AXIS 5600 User’s Manual 106
Starting AXIS
ThinWizard
Follow the instructions below to start the AXIS ThinWizard:
1. Make sure that the computer where you installed the AXIS
ThinWizard is up and running on your network.
2. Start a Web browser from a client in your network.
3. Enter the IP address or the host name of the server where you
installed AXIS ThinWizard. If the server is installed on another
port than 80, you must enter the port name after the host name or
the IP address.
4. The AXIS ThinWizard start page appears in the Web browser.
Enter your user name and the password and click the Log in
button.
5. The AXIS ThinWizard interface appears. Select a network group
from the list. If the list is empty, you must first create a group.