6 installation – AEG Voxtel D575 User Manual
Page 9
9
UK
tYou can move the cursor within the text with the / keys to amend the
text entry.
tPress “CLEAR“ to delete the last character.
tPress and hold “CLEAR“ to delete the entire text string.
6 INSTALLATION
6.1
Connecting the base station (see p4)
tPlug the power supply and line cord into the base station.
tPlug the power adapter into a 110-230 Vac, 50/60Hz mains socket and
the line cord into your telephone line socket.
tRoute the power adaptor and telephone line cords throught the
corresponding slots on the back of the telephone base.
tAlways use the cables provided in the box.
Warning:
>Use only the provided adaptor, using other power supplies may cause
a hazard or damage the phone.
>Install the base unit in a position where the mains adapter plug will
reach an easily accessible mains socket to unplug in case needed.
Never try to lengthen the mains power cable.
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2
Installing and charging the batteries (see P2)
tPlace the 2 supplied batteries into the battery compartment with the
polarity markings as shown. Use only the NiMH rechargeable battery
type provided with the telephone.
tPosition the battery compartment cover over the batteries and slide up
to click into place.
tPut the handset on the base and charge for 24 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.