AEG HG654320NM - Manual (Page 11)

Problem Possible cause Remedy
The fuse is released. Make sure that the fuse is
the cause of the malfunction.
If the fuse releases again
and again, contact a quali-
fied electrician.
Burner cap and crown are
placed incorrectly. Place the burner cap and
crown correctly.
The flame extinguishes im-
mediately after ignition. Thermocouple is not heated
up sufficiently. After lightning the flame,
keep the knob pushed for
equal or less than 10 sec-
onds.
The flame ring is uneven. Burner crown is blocked with
food residues. Make sure that the injector is
not blocked and the burner
crown is clean.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
ENGLISH 11