AEG S95800XTM0 - Manual (Page 17)

• Re-screw the middle hinge . Do not
forget the plastic spacer .
2
1
• Remove the covers (B). Remove the
cover pins (A).
• Unscrew the handles (C) and fix them
on the opposite side.
• Re-insert the cover pins (A) on the op-
posite side.
A
C
B
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cab-
inet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact
the nearest After Sales Service Force.
The After Sales Service specialist will re-
verse the doors at your cost.
9. TECHNICAL DATA
Dimension
Height 1850 mm
Width 595 mm
Depth 658 mm
Rising Time 20 h
Voltage 230 V
Frequency 50 Hz
ENGLISH
17