Nilfisk-ALTO MS Series - Manual (Page 7)

6
-. For Passive Subwoofer & Satellite Speakers
1). Connect one side of speaker cable to the Output CHA/CHB or Binding Post of your stereo power amplifier and the
other
side to the Input socket of your subwoofer, with the second speaker cable connect the Output of the subwoofer to
the Input of satellite.
2) Connect the input terminal of LTO MS1 with the AUX SEND of mixer ( or the similar terminal). Connect its output
terminal with the AUX RETURN of the mixer. Then select the preset as need.
3). Complete other connections as illustrated.
4). Turn on your mixer and MS1 first, then the stereo power amplifier.
5). Turn up the volume controls of your amplifier to about 70%.
6). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate
the output level.
7). After using, turn off your stereo power amplifier first, then the mixer and Ms1.
QUICK START
MS Passive Subwoofer & Satellite Speakers
Speaker Cable
pole
Mount
Speaker Cable
pole
Mount
Stereo
Power Amplifier
Left
Main Mix
Output
Right
Main Mix
Output
Speaker Cable
Speaker Cable
Mixer