AEG BS7304001M - Manual (Page 13)

When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with
the door open.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
COUNT UP TIMER To set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance.
TIME OF DAY To show the time of day. To change the time of day, re-
fer to "Setting the time".
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You can use Du-
ration and End at the same time (Time delay) if you want
the appliance to activate and deactivate automatically
later.
SET+GO To start the appliance with necessary settings with only
one touch of the sensor field any time later.
7.2 Count Up Timer
The Count Up Timer is not
activated if Duration and
End are set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch
again and again until flashes in
the display.
2. Touch until the display shows
"00:00" and the Count Up Timer
starts to count up again.
7.3 Setting the DURATION
1. Activate the appliance and set an
oven function and temperature.
2. Touch again and again until the
display shows .
flashes in the display.
3. Use or to set the minutes for
DURATION.
4. Touch to confirm.
5. Use or to set the hours for
DURATION.
If you touch or
while you set
the DURATION, the appliance
switches to the setting of the END
function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display.
The appliance deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Deactivate the appliance.
7.4 Setting the END
1. Activate the appliance and set an
oven function and temperature.
2. Touch again and again until the
display shows .
ENGLISH 13