3 the heat setting, 4 activation and deactivation of the outer rings, 5 automatic heat up – AEG HK764070FB User Manual

Page 22: 6 timer count down timer, Minute minder, 7 stop+go

Advertising
background image

4.3 The heat setting

Touch

to increase the heat setting.

Touch

to decrease the heat setting.

The display shows the heat setting.
Touch

and

at the same time to

deactivate the cooking zone.

4.4 Activation and
deactivation of the outer rings

You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring touch the sen-
sor field

/

. The indicator comes

on. For more outer rings touch the same
sensor field again. The subsequent indi-
cator comes on.
Do the procedure again to deactivate
the outer ring. The indicator goes out.

4.5 Automatic Heat Up

You can get a necessary heat setting in a
shorter time if you activate the Automat-
ic Heat Up function. This function sets
the highest heat setting for some time
(see the diagram), and then decreases to
the necessary heat setting.
To start the Automatic Heat Up function
the cooking zone must be cold (no

in

the display). Touch

of the cooking

zone again and again until the necessary
heat setting comes on. After 3 seconds

comes on in the display.

To stop the function, touch

.

1

2

3

4

5

6

7

8

9

10

11

0

1

2 3 4 5 6 7

8 9

4.6 Timer

Count Down Timer

Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Timer after the selection of
the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
To set the cooking zone: touch

again and again until the indicator of a
necessary cooking zone comes on.

To activate or change the Timer:

touch

or of the timer to set the

time (

00

-

99

minutes). When the in-

dicator of the cooking zone starts to
flash slow, the time counts down.

To deactivate the Timer: set the

cooking zone with

and touch to

deactivate the Timer. The remaining
time counts back to

00

. The indicator

of the cooking zone goes out.

To see the remaining time: set the

cooking zone with

. The indicator

of the cooking zone starts to flash
quickly. The display shows the remain-
ing time.

When the time comes to an end, the
sound operates and

00

flashes. The

cooking zone deactivates.
To stop the sound: touch

Minute Minder

You can use the Timer as a Minute
Minder
while the cooking zones do not
operate. Touch

. Touch

or

to

set the time. When the time comes to an
end, the sound operates and

00

flashes

To stop the sound: touch

4.7 STOP+GO

The

function sets all cooking zones

that operate to the lowest heat setting (

).

When

operates, you cannot change

the heat setting.
The

function does not stop the timer

function.

22 www.aeg.com

Advertising