AEG BS8314001M - Manual (Page 8)

4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and
Cleaning".
4.2 First Connection
When you connect the appliance to the
mains or after a power cut, you have to
set the language, display contrast, dis-
play brightness and time of day. Use the
shuttle to set the values. Press OK to
confirm.
5. CONTROL PANEL
5.1 Electronic programmer
1 2 3 4 5 6 7 8 9
Use the sensor fields to operate the appliance
Num-
ber
Sen-
sor
field
Function Comment
1
-
Display Shows the current settings of
the appliance.
2
ON / OFF To activate and deactivate the
appliance.
3
OK and shuttle To confirm the selection or set-
ting. Rotate the shuttle to navi-
gate.
4
Home key To show the main menu.
5
Time and additional functions To set different functions.
When a heating function oper-
ates, touch the sensor field to
set the timer, Child Lock, Fa-
vourite Programme memory,
Heat + Hold , Set + Go , or to
change the settings of the Core
Temperature Sensor.
8 www.aeg.com