AB Soft ATX 12V - Manual (Page 66)

BIOS Setup Utility SY- P4I865PE Plus DRAGON 2
61
Security Option
Use this feature to prevent unauthorized system boot-up or use of BIOS
Setup. The following table describes the security settings.
Setting Description Note
Setup If a password is set, the password
prompt only appears when you attempt
to enter the BIOS Setup program. Default Security Option
System If a password is set, prompt appears
both when entering CMOS setup and
during system POST.
Disabled APIC Mode
Enabled
Enabled the Advanced Programmable
Interrupt Controller (APIC) mode. On
operating systems that support it you
will have more IRQs available when
enabled.
Default
1.1 Default MPS Version
Control for OS 1.4 Allows you to choose the Multi
Processor Specification (MPS)
version.
Other Control Options
Setting Description Note
OS2 When using an OS2 operating
system. OS Select for
DRAM>64MB
Non-OS2 When using another,
non-OS2 operating system.
Default
Enabled HDD
S.M.A.R.T.
Capability
Disabled
Enabled this field when your HDD
supports the S.M.A.R.T. function.
Consult your HDD provider for
details.
Default
Yes Windows will release IRQ line 6
(normally used by the Floppy Disk
Drive) after you disable your
on-board FDD and set this field to
[Yes]. Report No FDD
For WIN 95
No Windows will reserve INT 6 for your
FDD, whether it is disabled or not. Default