AEG NC7003000M - Manual (Page 10)

2. Press the Selection button again and
again until the indicator for the nec-
essary clock function flashes.
3. Press + or - to set the necessary
clock function.
The display shows the indicator for
the clock function you set. When the
set time ends, the indicator flashes
and an acoustic signal sounds for
two minutes.
With the Duration and End
functions, the appliance deacti-
vates automatically.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
6.3 Cancelling the clock
functions
1. Press the Selection button again and
again until the indicator for the nec-
essary function flashes.
2. Press and hold the button "- " until
an acoustic signal sounds.
3. Release the button. The clock func-
tion goes out in some seconds.
7. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
10 www.aeg.com