AEG HK654400XB - Manual (Page 10)

Power function
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
matically sets back to highest heat setting. To activate, touch , comes on. To deacti-
vate, touch a heat setting - .
Power management
The power management divides the power be-
tween two cooking zones in a pair (see the illus-
tration). The power function increases the power
to the maximum level for one cooking zone in the
pair. Automatically decreases the power in the
second cooking zone to a lower level. The display
for the reduced zone change between two levels.
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone:touch again and again until the indicator of a necessary
cooking zone comes on.
• To activate the Count Down Timer: touch of the timer to set the time ( 00 - 99
minutes). When the indicator of the cooking zone start to flash slow, the time counts
down.
• To see the remaining time: set the cooking zone with . The indicator of the cooking
zone starts to quickly. The display shows the remaining time.
• To change the Count Down Timer:set the cooking zone with touch or .
• To deactivate the timer: set the cooking zone with . Touch . The remaining time
counts back to 00 . The indicator of the cooking zone goes out. To deactivate you can
also touch and at the same time.
When the countdown comes to an end, the sound operates and 00 flashes. The cooking
zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up timer)
Use the CountUp Timer to monitor how long the cooking zone operates.
• To set the cooking zone (if more than 1 cooking zone operate):touch again and
again until the indicator of a necessary cooking zone comes on.
10 Operating instructions