AEG BE5304001B - Manual (Page 8)

4.2 Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few
seconds the display shows the software
version.
After the software version goes off, the
display shows
and "12:00". "12"
flashes.
1. Press or to set the current
hour.
2. Press to confirm. This is necessary
only when you set the time for the
first time. Later the new time will be
saved automatically after 5 seconds.
The display shows and the set
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm. This is necessary
only when you set the time for the
first time. Later the new time will be
saved automatically after 5 seconds.
The display shows the new time.
4.3 Changing the time
You can change the time of day only if
the oven is off.
Press .
The set time and symbol flash in the
display.
To set a new time, refer to "Setting the
time".
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Retractable knobs
To use the appliance, press the control
knob. The control knob comes out.
5.2 Activating and
deactivating the appliance
It depends on the model if
your appliance has knob
symbols, indicators or
lamps:
• The indicator comes on
when the oven heats up.
• The lamp comes on when
the appliance operates.
• The symbol shows
whether the knob
controls the oven
functions or the
temperature.
1. Turn the knob for the oven functions
to select an oven function.
2. Turn the knob for the temperature to
select a temperature.
3. To deactivate the appliance turn the
knobs for the oven functions and
temperature to the off position.
www.aeg.com 8