Automatic heat up, Timer – AEG HK614010BB User Manual

Page 25

Advertising
background image

Automatic Heat Up

1

2

3

4

5

6

7

8

9

10

11

12

13

14

0

1 2 3 4 5 6 7 8 9 10 11 12 13 14

MIN.

TEM.

You can get a necessary heat setting in a shorter time if you activate the Automatic Heat

Up function. This function sets the highest heat setting for some time (see the illustration),

and then decreases to the necessary heat setting.

To start the Automatic Heat Up function for a cooking zone:
1. Touch ( comes on in the display).
2. Immediately touch the necessary heat setting. After 3 seconds comes on in the dis-

play.

To stop the function change the heat setting.

Timer

Count Down Timer

Use the Count Down Timer to set how long the cooking zone operates for only this one

time.

Set the Count Down Timer after the selection of the cooking zone.

You can set the heat setting before or after you set the timer.
• To set the cooking zone:touch again and again until the indicator of a necessary

cooking zone comes on.

• To activate the Count Down Timer: touch of the timer to set the time (

00

-

99

minutes). When the indicator of the cooking zone start to flash slow, the time counts

down.

• To see the remaining time: set the cooking zone with . The indicator of the cooking

zone starts to quickly. The display shows the remaining time.

• To change the Count Down Timer:set the cooking zone with touch or .
• To deactivate the timer: set the cooking zone with . Touch . The remaining time

counts back to

00

. The indicator of the cooking zone goes out. To deactivate you can

also touch and at the same time.

When the countdown comes to an end, the sound operates and

00

flashes. The cooking

zone deactivates.

Operating instructions

25

Advertising