AEG BE5304001B - Manual (Page 11)

Button Function Description
, MINUS, PLUS To set a value for time
Heat-up / Residual heat indicator
If you activate an oven function, the bars in the display come on one by one. The bars
show that the oven temperature increases or decrease.
CLOCK FUNCTIONS
SYMBOL FUNCTION DESCRIPTION
MINUTE MINDER Use to set a countdown time. This function has no effect on
the operation of the oven.
TIME OF DAY To set, change or control the time of day. Refer to 'Setting the
time of day'.
DURATION Use only when the oven function is set to set how long the
oven operates.
END Use only when the oven function is set to set when the oven
stops. You can use Duration and End at the same time (Time
delay), if the appliance is to be activate and deactivate auto-
matically later.
Press again and again to switch between the clock functions.
To confirm settings of the clock functions use or wait 5 seconds for an automatic con-
firmation.
Setting the DURATION or END
1. Press again and again until the display shows or .
or flashes in the display.
2. Press or to set minutes.
3. Press to confirm.
4. Press or to set the necessary hour.
5. Press to confirm.
A sound operates after the time ends for 2 minutes.
or symbol and time setting
flash in the display. The oven stops.
6. Press any button or open the oven door to stop the sound.
If you press button during setting hours for DURATION , the appliance goes to set-
ting of the END function.
Setting the MINUTE MINDER
Use to set a countdown (maximum 23 h 59 min) This function has no effect on the opera-
tion of the oven
Clock functions 11