AEG KRC 4355 CD - Manual (Page 39)

English
39
Alarm function (in standby mode)
Setting of the Alarm
You can set two alarm times. Proceed as follows:
1. Switch the device into standby mode with the STANDBY/
AL.OFF ( ) button (12/35).
2. Keep the AL SET button pressed for ca. 3 seconds. The
hours of the currently set alarm time start to flash.
3. Use the buttons /F.FWD and /REW (6/7/33) for
setting.
4. Press the AL SET button for confirmation. The minutes
start to flash.
5. Use the buttons /F.FWD and /REW for setting.
6. Press the AL SET button to confirm. Then select how you
want to be awakened. Select from:
•
(Buzzer):
A buzzer sounds when the alarm time is reached.
The buzzer interval increases from slow to fast. The
volume cannot be adjusted.
• FM:
As soon as your set alarm time is shown, the radio
switches on. The last set station is played.
• CD:
As soon as your specified alarm time has been
reached, the device will start in CD mode. The inser-
ted CD will be played starting with the first title.
7. Finally, press the AL SET button again. You will reach the
setting of the second alarm time. To set it, proceed as
described above.
NOTE:
If you only want to set the first alarm time, press the ALM
SET button until the time is displayed again.
Activating alarm time
You may activate the first or the second alarm time, or both.
1. Briefly press the AL SET button (15/25). “AL 1” and the
symbol of the selected alarm mode will appear in the
display.
2. Press the AL SET button again. “AL 2” and the symbol of
the selected alarm mode will appear in the display.
3. Press the AL SET button one more time to activate both
alarm times.
Snooze function
The automatic alarm can be switched off using the SLEEP/
SNOOZE button (17/29) for approx. 9 minutes. The symbol
“ ” will appear in the display.
Switch off the buzzer
In order to switch off the alarm until the following day please
press the STANDBY/AL.OFF / button.
Disabling the alarm
To deactivate the alarm, press the AL SET button (15/25) until
the alarm symbol is no longer shown in the display.
Delayed Shut-Off (SLEEP)
The unit is switched off automatically when the selected time
is reached.
• Select the time after which the unit is switched off by
repeatedly pressing the SLEEP/SNOOZE button (17/28).
The following selections can be made: 120, 90, 60, 45, 30,
and 15 minutes. The notification “SLEEP” will appear in
the display.
• This function can be cancelled with the STANDBY/
AL.OFF ( ) button (12/35).
AUX IN socket
To connect analogue replay devices. Via this socket you can
also hear the sound of other playback devices such as MP3
players, CD players etc. through the loudspeakers.
1. Connect an external device to the AUX IN jacks (2x RCA)
on the back of the device. Use a suitable adapter cable
(not supplied).
2. Turn on the device with the STANDBY/AL.OFF ( ) button
(12/35).
3. Use the FUNCTION button (13/27) to select the AUX
mode. “AV” will appear on the display.
4. Through the loudspeakers you can hear the playback of
the sound from the external device; with the VOLUME
control (1) you can change the volume. The CD buttons
are not functional.
5. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.
Cleaning
CAUTION:
• Do not dip the appliance in water.
• Do not use a wire brush or other abrasive objects.
• Do not use any caustic or abrasive cleaning agents.
• Remove the plug before cleaning.
• Clean the appliance with a slightly humid cloth without
any additives.