AGFA ePHOTO 1280 - Manual (Page 53)

Troubleshooting (cont.)
The LCD screen doesn’t light up.
◗ The camera may be connected to a computer. Disconnect the camera or view the images
in PhotoWise.
◗ The camera may be connected to a TV. Disconnect the camera or view the images on your
TV set.
◗ The batteries may be too weak. Replace them.
The live image on the LCD screen is jerky.
◗ The low light preview setting is selected. This setting is used to display a dark scene more
brightly to help you frame the shot. Use this setting to take a dark picture, or restore the
normal preview setting .
The live image on the LCD screen appears brighter than it should be.
◗ The low light preview setting is selected. This setting is used to display a dark scene more
brightly to help you frame the shot. Use this setting to take a dark picture, or restore the
normal preview setting .
◗ You may have selected an incorrect advanced exposure setting. If the Manual or
White Balance symbol appears, adjust the exposure setting or set it to automatic.
53