Asus M2A-MVP - Manual (Page 64)

2-16 Chapter 2: BIOS setup
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [�] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA�] [SWDMA1]
[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2]
[UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
2.3.5 Storage Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
Onchip SATA Channel [Enabled]
Allows you to enable or disable the onchip SATA channel.
Configuration options: [Disabled] [Enabled]
The succeeding item appears only if the OnChip SATA Channel item is set to
[Enabled].
Onchip SATA Type [Native IDE]
Allows you to select the onchip SATA type.
Configuration options: [Native IDE] [RAID] [A�CI] [Legacy IDE]
Storage Configuration
Onchip SATA Channel [Enabled]
Onchip SATA Type [Native IDE]
Options
Disabled
Compatible