The automatic heat up, Power function, Power management – AEG HC652600EB User Manual

Page 24

Advertising
background image

• You use not correct cookware. The symbol comes on and the cooking zone deacti-

vates automatically after 2 minutes.

• You do not deactivate a cooking zone or change the heat setting. After some time,

comes on and the appliance deactivates. See the table.

The times of Automatic Switch Off

The heat setting

-

-

-

The cooking zone

deactivates after

6 hours

5 hours

4 hours

1.5 hours

The Automatic Heat Up

You can get a necessary heat setting in a

shorter time if you activate the Automatic

Heat Up function. This function sets the

highest heat setting for some time (see the

table in the chapter: Helpful hints and tips),

and then decreases to the necessary heat

setting.

To start the Automatic Heat Up function for

the cooking zone turn the knob clockwise

until the display shows . Then set imme-

diately the necessary heat setting. After 2

seconds comes on.

To stop the function turn the knob counter-

clockwise and set a lower heat setting.

Power function

The Power function makes more power available to the induction cooking zones. The Power

function is activated for 10 minutes at most. After, that the induction cooking zone auto-

matically sets back to heat setting 9. To activate, set the heat setting with knobs, than

touch , comes on. To deactivate, change the heat setting.

Power management

The power management divides the power be-

tween two cooking zones in a pair (see the illus-

tration). The power function increases the power

to the maximum level for one cooking zone in the

pair. Automatically decreases the power in the

second cooking zone to a lower level. The display

for the reduced zone change between two levels.

1

2

3

4

5

6

7

8

9

10

11

0

1

2

3

4

5

6

7

8

9

24

Operating instructions

Advertising