APC BR800I - Manual

APC BACK-UPS RS 800VA 230V
Part Number: BR800I
Technical Specifications
Output
Output power capacity 800 VA
Output power capacity 540 watts
Max Configurable Power 800 VA
Max Configurable Power 540 watts
Nominal output voltage 230V
Output Connections
(2) ERROR: No Translation
Found (Surge Protection)
(4) ERROR: No Translation
Found (Battery Backup)
(2) ERROR: No Translation
Found (Battery Backup)
Input
Nominal input voltage 230V
Input frequency 47-63
Input Connection Type IEC-320 C14
Input voltage range for main
operations
175 - 295 V
Input voltage adjustable range for
mains operation
160 - 300 V
Batteries & Runtime
Battery type
Maintenance-free sealed Lead-Acid
battery with suspended electrolyte :
leakproof
Pre-Installed Batteries 1
Replacement battery cartridge RBC32
RBC™ Quantity 1
Typical backup time
at half load
17.6 minutes (270 Watts)
Typical backup time
at full load
5.3 minutes (540 Watts)
Runtime Chart Back-UPS RS
Communications & Management
Interface port USB
Control panel LED status display with On Line : On
Battery : Replace Battery and Overload
Options:
{ Services
User Manual & Installation Guides:
Back-UPS RS 230 V (Manual)
Back-UPS RS 230 V (Manual)
Back-UPS RS 230 V (Sheet)
Safety Guide - Smart-UPS & Back-UPS (Sheet)
General Features:
{ Adjustable voltage sensitivity
{ Adjustable voltage-transfer points
{ Audible Alarms
{ Automatic restart of loads after UPS shutdown
{ Automatic self-test
{ Battery replacement without tools
{ Battery-protected and surge-only outlets
{ Boost and Trim Automatic Voltage Regulation
(AVR)
{ Cold-start capable
{ Dataline Surge Protection
{ Hot-swappable batteries
{ Intelligent Battery Management
{ LED status indicators
{ Lifetime data recovery warranty
{ Multiple mounting methods
{ Power conditioning
{ Resettable circuit breakers
{ Safety-agency approved
{ Serial Connectivity
{ Transformer-block spaced outlets
{ USB Connectivity
{ User-replaceable batteries
more details...
Topology: Line Interactive