Cleaning, English – AEG WUB 5647 User Manual

Page 32

Advertising
background image

English

32

Operating instructions

Operation
Use the electric underblanket on the mattress of your bed.
The electric underblanket must be fixed to the mattress
using the tightening straps.
• Place the electric underblanket on the mattress.
• Place the tightening straps over the corners.
• The electric underblanket must lie on the mattress in

a flat, crease-free and uncovered manner.

• Guide the cable from the bed such that you are still able

to operate the thermostat properly.

ATTENTION:

The step switch may not be covered by bedding or
pillows. This can lead to a malfunction.

Electrical connection
• Ensure that the device voltage (see label) and the mains

voltage are the same.

• Insert the plug into a properly installed socket.
Switching on
• Move the step switch on the controller to the desired

setting.

• The indicator light will illuminate to show that the device

is in operation.

Step switch
You can choose the following settings:

Settings

function

Information for use

0

Off

1

Low. Light

heat.

Suitable for use at night.

2

Medium

Not suitable for use at night.

Use for a maximum

of two hours.

3

High

Not suitable for use at night.

Only for warming the bed

before you go to bed.

Switching off
• Set the step switch to

0 (off).

• Only then pull the plug out of the wall socket.

1. First remove the plug in the electric underblanket from

the socket.

2. Remove the plug from the electricity supply.
3. You can wash the electric underblanket in the washing

machine on a delicate cycle at 40 °C or by hand as it is
hermetically sealed.

Use a mild detergent and follow the instructions of the

manufacturer on amount of detergent.

Cleaning

WARNING:

• Pull the plug out of the socket before each time you clean

the device.

• Only clean the device when it is cool.

Risk of burns!

• The electric underblanket with step switch may not be placed

in the washing machine or tumble dryer.

• Do not submerge the step switch in water. This could lead

to an electric shock or a fire.

Please note the care instructions on the label.

Advertising